Brighto Stucco Filler « Brighto Paints

Our Products

View Available Shades

Brighto Stucco Filler

Finish: Silk, Smooth, Soft Sheen,

Size: 3.60 Ltr, 18 Ltr

Price

Packaging Price
18 Ltr 57 AED
3.60 Ltr 14 AED

Walls/surfaces to paint

Surface Width Height
1 x
Ceiling Width Ceiling Height
x

Areas to exclude (windows, doors, vents, etc.)

Surface Width Height
1 x

Result

Total area
0 sq ft
Paint amount
(single coat application)
0 gallons
Ceiling area
0 sq ft
Ceiling paint
(single coat application)
0 gallons

Coverage

Dry Time

Surface Dry 1-2 hours
Hard Dry 3 hours
Over coating Time 3 hours

Brighto Stucco Filler

Finish: Silk, Smooth, Soft Sheen,

Size: 3.60 Ltr, 18 Ltr

Price

Packaging Price
18 Ltr 57 AED
3.60 Ltr 14 AED

Walls/surfaces to paint

Surface Width Height
1 x
Ceiling Width Ceiling Height
x

Areas to exclude (windows, doors, vents, etc.)

Surface Width Height
1 x

Result

Total area
0 sq ft
Paint amount
(single coat application)
0 gallons
Ceiling area
0 sq ft
Ceiling paint
(single coat application)
0 gallons

Coverage

Dry Time

Surface Dry 1-2 hours
Hard Dry 3 hours
Over coating Time 3 hours
View Available Shades

Disclaimer:- Colors may differ slightly from photos due to different monitor resolution and settings

Brighto Stucco Filler

Brighto Stucco Filler is water based and nontoxic. It does contain chemicals that may be irritants to mammalian tissue appropriate protective clothing must be worn. Protect eyes and skin from exposure. If the product is being sprayed, ensure adequate ventilation and ensure the use of proper ventilated masks. Wash spillages immediately with water. Do not induce vomiting if swallowed. Consult a physician if irritation of skin persists or if product is ingested. Gather up environmental spillages, and dispose of in accordance with regulations of the local authorities.

Special Features

Brighto Stucco Filler is a superior quality PVA Copolymer based smooth putty, which gives smooth and levelled surface suitable for doing different subsequent coats. It has good properties of antifungal and antibacterial.

Product Description

Brigthto Stucco Filler is designed for interior use, to be applied onto all suitably prepared masonry, gypsum and composition board substrates. Brigthto Stucco Filler is applied by trowel or putty knife. Brigthto Stucco Filler is supplied ready for use. Do not use on extremely porous substrates.

Brigthto Stucco Filler should only be applied when the temperature of the substrate is at least 2 C° above dew point. In hot climates, the coating should be applied during the morning and late afternoon hours and if possible away from direct sunlight.