Disclaimer:- Colors may differ slightly from photos due to different monitor resolution and settings
Brighto Antiqua Polish Plaster
Brighto products are water based non-hazardous and non-toxic. Care however should be taken in handling, as the chemicals contained in the formula are irritants to human tissue. Adequate ventilation equipment including breathing apparatus and gloves should be worn particularly when applying the product. Splashes onto skin and eyes should be rinsed with adequate amounts of water. Wash hands immediately after use. If swelling or irritation persists, consult a physician. Spillages should not be discarded into landfill or aquatic environments. Dispose waste as per chemical regulations of region.
Brighto Antiqua Polish Plaster is water based colored prestigious decorative finish, which creates an attractive marble like effect to the interior surfaces. Brighto Antiqua Polish Plaster is recommended for interior application and can be used on gypsum boards, concrete, plastered walls etc.
Product Uses and Application
The surface on which antique polish plaster is to be applied should be dry and free from dust and oil. Using sand paper, the surface should be leveled and made smooth and free from loose particles. Apply one coat of Brighto PVA Primer (W.B.) as penetrating sealer to seal the surface. If required, two coats of Brighto Stucco Filler can be used for leveling the surface and again followed by one coat of Brighto PVA Primer and do sanding. Apply first coat of Brighto Stucco Antique as background color using a spatula knife and allow it to dry for 10-12 hours. Once dry, apply second coat of Brighto Antiqua Polish Plaster using a spatula knife as design coat. After 6-8 hours, buffing can be done using a stainless spatula knife. Dry buffing is advisable for better finish and gloss.