Disclaimer:- Colors may differ slightly from photos due to different monitor resolution and settings
Brighto Perlex products are water based non-hazardous and non-toxic. Care however should be taken in handling, as the chemicals contained in the formula are irritants to human tissue. Adequate ventilation equipment including breathing apparatus and gloves should be worn particularly when applying the product. Splashes onto skin and eyes should be rinsed with adequate amounts of water. Wash hands immediately after use. If swelling or irritation persists, consult a physician. Spillages should not be discarded into landfill or aquatic environments. Dispose waste as per chemical regulations of region.
Brighto Perlex is an environmentally friendly, acrylic based decorative coating, designed for a silky sand textured pearlescent appearance to the surface and which simulates architectural look. It offers excellent adhesion and an easy to clean coating. It is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. For a silky sand textured pearlescent appearance to the surface. For better color performance, apply base coat Brighto Plastic Emulsion closer to the shade of Perlex. Any topcoat application over Brighto Perlex is not recommended.
Product Uses and Application
The surface on which Brighto Perlex is to be applied should be dry and free from dust and oil. Using sand paper, the surface should be leveled and made smooth and free from loose particles. Apply one coat of Brighto Acrylic PRIMER (W.B.) as penetrating sealer to seal the surface. If required, two coats of Brighto Stucco Filler can be used for leveling the surface and again followed by one coat of Brighto Plastic Emulsion closer to the Perlex shade. Apply Perlex as topcoat with brush